Skip to content

Maintenance of GSM Tools – SS2 Computer Hardware & GSM Repair Lesson Note (First Term)

Lesson note at a glance

Class
SS2
Subject
Computer Hardware & GSM Repair
Term
First Term
Reading time
6 min
Start of this note, 5 of 7
Take this term’s notes offline
Reading here is free. Download all 7 SS2 Computer Hardware & GSM Repair First term notes as PDF to print and Word to edit.
Download all three terms, ₦2,000
Instant download. Secure payment by Paystack. Card, bank transfer, USSD or OPay. Payment stuck? WhatsApp us.

Maintenance of GSM tools is the cleaning, correct use, careful storage and regular checking of repair tools so they last and do not damage customers’ phones.

Behavioural objectives

By the end of the lesson, students should be able to:

Advertisement
  1. explain why GSM repair tools must be maintained;
  2. describe how to care for a soldering iron, including tinning and cleaning the tip;
  3. state the cooling rule and storage rules for a hot air gun;
  4. describe how to care for a multimeter, its probes and its battery;
  5. list the general workshop safety habits and the end-of-day routine for each tool.

Why does maintenance of GSM tools matter?

Maintenance matters because GSM tools work on tiny, delicate parts, and a faulty tool can destroy a customer’s phone.

  • Everyday example: a barber with blunt, rusty clippers gives a bad haircut, and the tool may break mid-job.
  • GSM meaning: GSM stands for Global System for Mobile communication.
  • Small parts: phone motherboards carry tiny components that are easily damaged.
  • Saves money: well-kept tools last longer and need fewer replacements.
  • Protects customers: good tools give correct readings and clean solder joints.
  • Prevents accidents: hot tools in poor condition can cause burns and fires.

What are the main GSM repair tools?

The three main tools in this lesson are the soldering iron, the hot air gun and the multimeter.

Tool Use Most important part to protect
Soldering iron Joins components using solder. The tip
Hot air gun Melts solder to remove chips (ICs) from a board. The heating element and nozzle
Multimeter Measures voltage, resistance and continuity. The dial setting, probes and battery

How do you care for a soldering iron (the “precision pen”)?

A soldering iron is cared for by keeping its tip clean, tinned and not overheated.

  • Purpose: it joins electronic components using a metal wire called solder.
  • Tinning the tip: leave a small blob of fresh solder on the tip before switching off, to stop rust (oxidation).
  • Cleaning: use a damp cellulose sponge or a brass wire cleaner, never a file or sandpaper, which strips the protective coating.
  • Temperature control: do not leave the iron at its highest setting when idle, because heat “burns” the tip and turns it black.
  • Safe resting: return the iron to its stand after each joint so it cannot roll off the table.
  • Hygiene: wash your hands after handling solder, because some solder contains lead.
Advertisement

Signs that a soldering iron tip needs attention

  • Black, dull tip: the tip has oxidised or been overheated.
  • Solder will not stick: the tip is dirty or has lost its tinned layer.
  • Worn or pitted tip: the tip should be replaced.

Shut-down steps for a soldering iron

  1. Wipe the tip on the damp sponge or brass cleaner.
  2. Melt a small blob of fresh solder onto the tip.
  3. Switch off and unplug the iron.
  4. Leave it in the stand until it is cool.

How do you care for a hot air gun (rework station)?

A hot air gun is cared for by letting it cool before switching off, fixing the nozzle tightly and storing the handle upright in its holder.

  • Purpose: it blows very hot air to melt solder so chips (ICs) can be removed from a phone board.
  • The cooling cycle: this is the golden rule. Place the handle in its holder and let the fan run until the air is cold before using the main power switch.
  • Why cooling matters: switching off while the element is glowing hot can damage the internal heating element.
  • Auto-sleep mode: many modern guns have this feature to help with cooling.
  • Nozzle care: fix nozzles tightly. A loose nozzle lets heat leak into the handle and can melt plastic or burn your hand.
  • Vertical storage: keep the handle in its stand. Dropping it or leaving it face-down on a table can cause fire or damage the heating coil.
  • Safe use: never point the gun at people, and keep paper and other flammable items away.

Shut-down steps for a hot air gun

  1. Finish the job and place the handle in its holder.
  2. Let the fan keep blowing while the gun cools.
  3. Check that the air coming out is cold.
  4. Switch off the main power.

How do you care for a multimeter (the “doctor’s stethoscope”)?

A multimeter is cared for by choosing the correct dial setting, handling the probes gently and changing a weak battery at once.

Advertisement
  • Purpose: it shows whether a battery is dead, a charging port works, or a short circuit exists in the phone.
  • The right setting: a wrong setting is a common way meters are damaged. Measuring a mains socket (about 220 V) while set to resistance or continuity can blow a fuse or destroy the meter.
  • Double check: look at the dial twice before touching the probes to a circuit.
  • Probe care: do not wrap the red and black leads tightly around the meter, because the copper inside can snap. Fold them gently.
  • Probe inspection: replace any lead with cracked insulation or exposed wire.
  • Battery management: change the battery at once when the display is dim or the low-battery icon appears.
  • Why battery matters: a weak battery gives false readings, and you may think a good phone is faulty.
  • Dry storage: keep the meter away from water and dust.

What are the general workshop safety and care rules?

General workshop rules protect both the tools and the phones from static, dust, heat and clutter.

  • Anti-static mat: work on an anti-static mat, ideally with a wrist strap, to protect the phone’s circuits from static sparks from your body.
  • Dust control: dust harms electronics, so cover your station with a clean cloth at the end of the day.
  • Organisation: a messy table causes accidents. A hot iron that rolls off could land on your lap or a customer’s phone screen.
  • Ventilation: work in a room with fresh air, because soldering produces fumes.
  • Cool before storing: never pack away a tool that is still hot.

What is the end-of-day routine?

The end-of-day routine is a set of actions done for each tool before closing the workshop.

Tool Action Why?
Soldering iron Clean the tip and “tin” it with solder. Prevents rust and keeps the tip shiny.
Hot air gun Let it cool fully, then switch off the power. Protects the heating element.
Multimeter Turn the dial to “OFF”. Saves the battery for tomorrow.
Probes and cables Coil them loosely and do not bend them sharply. Prevents the wires from breaking inside.
Work station Clear the table and cover it with a clean cloth. Keeps dust off the tools.
Advertisement

Evaluation

  1. Why is it wrong to clean a soldering iron tip with a metal file?
  2. What happens if you switch off a hot air gun while the internal coil is still glowing red?
  3. What is the danger of using a multimeter with a very low battery?
  4. What is tinning, and why is it done before switching off a soldering iron?
  5. State two safety habits to follow in a GSM workshop.

Assignment

For each of the soldering iron, the hot air gun and the multimeter, write two ways to care for the tool and give the reason for each.

Teacher's lesson plan

A ready-to-use lesson plan for this topic: objectives, previous knowledge, materials, step-by-step presentation, board summary and conclusion.

Included when you get this note, and inside your download. Sign in with your purchase to see it here.

Sign in

This term's Computer Hardware & GSM Repair topics

SS2 First Term · 7 topics

  1. Computer Storage Device
  2. Advanced Computer Components
  3. Computer Troubleshooting I
  4. Computer Troubleshooting II
  5. Maintenance of GSM Tools
  6. GSM Circuit Boards
  7. GSM Circuit Tracing
Advertisement

Lesson Notes for Other Classes

Print it or edit it in Word

Every note is free to read online. A PDF or Word copy of one subject costs ₦1,000 for one term, or ₦2,000 for all three terms.

Sign in first, then choose your class and subject at checkout.