Skip to content

Computer Troubleshooting I – SS2 Computer Hardware & GSM Repair Lesson Note (First Term)

Lesson note at a glance

Class
SS2
Subject
Computer Hardware & GSM Repair
Term
First Term
Reading time
6 min
Start of this note, 3 of 7
Take this term’s notes offline
Reading here is free. Download all 7 SS2 Computer Hardware & GSM Repair First term notes as PDF to print and Word to edit.
Download all three terms, ₦2,000
Instant download. Secure payment by Paystack. Card, bank transfer, USSD or OPay. Payment stuck? WhatsApp us.

Troubleshooting is the process of finding out why a computer is not working properly and fixing it. When a computer is switched on, it runs a quick check called POST (Power-On Self-Test). If POST finds a fault, the computer gives a beep code or an error message. Technicians use these clues, then check the computer step by step.

Behavioural objectives

By the end of the lesson, students should be able to:

Advertisement
  1. Define troubleshooting and POST.
  2. State what common beep codes mean.
  3. Explain common POST error messages.
  4. Carry out the basic diagnostic steps in the correct order.
  5. State the safety rule to follow before opening a computer.

What is troubleshooting?

Troubleshooting is the process of finding out exactly why a computer is acting up and fixing it.

  • Detective work: the technician looks for clues, tests ideas and finds the fault.
  • Common signs of a fault: a black screen, a loud beep, an error message or a computer that will not switch on.
  • Aim: to find the cause, not just to hide the symptom.

What are the general steps of troubleshooting?

  1. Ask what happened and what the user did before the fault.
  2. Look and listen for clues such as beeps, lights and messages.
  3. Test the simplest causes first, such as cables and switches.
  4. Fix or replace the faulty part.
  5. Switch on again to confirm the fault is gone.

What is POST?

POST (Power-On Self-Test) is a very fast self-check that a computer runs the moment the power button is pressed.

  • When it runs: before the desktop or operating system loads.
  • What it checks: the main parts needed to start, such as the CPU, RAM, graphics and keyboard.
  • If all is well: the computer carries on and loads the operating system.
  • If a fault is found: the computer gives an error message or a beep code, and start-up may stop.

How can POST be compared to a morning routine?

  • Do I have my eyes? This is the monitor.
  • Do I have my hands? This is the keyboard and mouse.
  • Is my brain working? This is the CPU and RAM.

What are beep codes?

Beep codes are patterns of sound a computer makes to report a fault when it cannot yet show text on the screen.

Advertisement
  • Why sound is used: the graphics part may not be ready, so the screen stays blank.
  • Different languages: each motherboard (the main circuit board) maker has its own codes.
  • Best guide: check the motherboard manual for the exact meaning.

What are the common beep codes?

  • One short beep: everything is okay. The computer passed POST.
  • No beep at all: usually a power problem, or the motherboard is completely dead.
  • Repeated long beeps: usually a problem with the RAM (memory). It is loose or faulty.
  • One long beep, two short beeps: usually a graphics card (video) failure.
  • Continuous high-pitched beep: often means the CPU is overheating. Switch the computer off immediately.

What are POST error messages?

A POST error message is a short line of text shown on the screen, usually white on black, when POST finds a fault.

  • “CMOS Checksum Error”: the small battery on the motherboard is weak or dead. The computer has “forgotten” the time and date.
  • “Keyboard Not Found”: the keyboard is not detected. Check that it is plugged in properly.
  • “HDD/SSD Boot Failure”: the computer cannot find the operating system. The drive is unplugged or has failed.

What are the basic diagnostic steps?

The basic diagnostic steps are three checks done in order: check the basics, listen and look, then reseat the components.

  • Logic of elimination: remove the simple causes first, one at a time, until the real fault is left.
  • Stay calm: follow the steps in order and do not rush.
Step A Check basics Step B Listen and look Step C Reseat parts
The three basic diagnostic steps, in order.

Step A: What are the basics to check?

Step A is to check the simple things first, the “Is it plugged in?” rule.

Advertisement
  • Power cable: push it all the way into the wall socket and the computer.
  • Monitor: check that it is actually switched on and its cable is fixed.
  • Power switch: make sure no one flipped the switch at the back of the case.

Step B: What should you listen and look for?

Step B is to use your ears and eyes to collect clues.

  • Listen: note any beep codes described above.
  • Look: check the status lights on the front of the case. Note whether they are red, orange, green or off.
  • Read: write down any error message on the screen.

Step C: How do you reseat the components?

Reseating means removing a part and pushing it firmly back into its slot, because parts can work loose when a desk is moved.

  1. Switch off the computer and unplug the power cable from the wall.
  2. Open the case.
  3. Take out the RAM and graphics card.
  4. Push them back in firmly until they “click”.
  5. Close the case, reconnect the power and switch on.
  • Result: this fixes many common PC problems.

What are the symptoms, likely causes and first actions?

This table matches each common symptom to its likely cause and the first action to take.

Symptom Likely cause First action
Complete silence No power Check cables and power supply.
Repeated long beeps RAM issue Remove the RAM, clean the gold edges and put it back.
Screen stays black Monitor or graphics card Check the monitor cable or reseat the video card.
Continuous high-pitched beep CPU overheating Switch off at once and let the computer cool.
“CMOS Checksum Error” Weak or dead motherboard battery Replace the small battery and reset the time and date.
Stuck on black text screen Settings or hard drive Read the error message. It usually tells you what is wrong.
Advertisement

What safety rule must you follow before opening a computer?

The safety rule is to switch off and unplug the power cord from the wall before opening the computer.

  • Safety first: never open a computer while the power cord is plugged into the wall.
  • Danger to you: you could get an electric shock.
  • Danger to the computer: you could damage the parts.
  • Static electricity: touch the bare metal of the case before handling parts, or wear an anti-static wrist strap.

Evaluation

  1. What is troubleshooting?
  2. What does POST stand for, and what does it do?
  3. What does it usually mean when a computer gives repeated long beeps? What does a continuous high-pitched beep often mean?
  4. What does the error message “CMOS Checksum Error” mean?
  5. List the three diagnostic steps (A, B and C) in order.

Assignment

Answer both parts in your notebook.

  1. Explain what each of these means: one short beep, no beep at all, and one long beep followed by two short beeps.
  2. Write out the steps for reseating the RAM and graphics card, and state the safety rule you must follow first.

Teacher's lesson plan

A ready-to-use lesson plan for this topic: objectives, previous knowledge, materials, step-by-step presentation, board summary and conclusion.

Included when you get this note, and inside your download. Sign in with your purchase to see it here.

Sign in

This term's Computer Hardware & GSM Repair topics

SS2 First Term · 7 topics

  1. Computer Storage Device
  2. Advanced Computer Components
  3. Computer Troubleshooting I
  4. Computer Troubleshooting II
  5. Maintenance of GSM Tools
  6. GSM Circuit Boards
  7. GSM Circuit Tracing
Advertisement

Lesson Notes for Other Classes

Print it or edit it in Word

Every note is free to read online. A PDF or Word copy of one subject costs ₦1,000 for one term, or ₦2,000 for all three terms.

Sign in first, then choose your class and subject at checkout.