Basic Drafting Pattern Techniques and Fashion Designing – JSS2 Home Economics Lesson Note (Second Term)
Lesson note at a glance
- Subject
- Home Economics
- Class
- JSS2
- Term
- Second Term
- Topic
- Basic Drafting Pattern Techniques and Fashion Designing
- Order
- Topic 6 of 6 this term
- Reading time
- 7 min
Pattern drafting is the making of basic patterns, called blocks, to the exact size of the body.
- Basic blocks: the bodice, the skirt and the sleeve.
- Adaptation: a block can be changed to make any style.
- Purpose: patterns guide the cutting of fabric, save time and fabric, and make sewing easy.
- Types: drafted patterns and commercial patterns.
Behavioural objectives
By the end of the lesson, students should be able to:
- state the uses of patterns in garment construction
- name the two types of patterns and give their advantages and disadvantages
- list common pattern markings and symbols and say what each shows
- take basic body measurements correctly
- name pattern drafting tools and state their uses
- explain fashion designing and list the elements of design
What is pattern drafting?
Pattern drafting is the process of drawing a pattern on paper from a person’s body measurements.
- Block: a basic or foundation pattern drafted to the exact size of the body.
- Bodice: the part of a garment that covers the upper body, from the shoulders to the waist.
- Skirt block: the basic pattern for the part of a garment that hangs from the waist.
- Sleeve block: the basic pattern for the part that covers the arm.
- Adapting a block: changing the block to get a wanted style.
What are the uses of patterns in garment construction?
- Guide for cutting: patterns direct the cutting of fabric.
- Fewer mistakes: they prevent serious mistakes in dressmaking.
- Saves time: they prevent waste of time.
- Saves fabric: they prevent waste of fabric.
- Easy sewing: they make sewing easy.
- Less trial and error: they reduce guessing when sewing.
What are the types of patterns?
There are two types of patterns: the drafted pattern and the commercial pattern.
What is a drafted pattern?
A drafted pattern is a pattern made to fit one particular person.
- The person’s body measurements are taken first.
- The pattern is then drafted to fit that size.
Advantages of drafted patterns
- It can be made to fit a person perfectly.
- It can be adapted to any type of style.
- It is cheaper than the commercial pattern.
- It can help to check the fit of a design before it is made into a garment.
- It is original and therefore can be unique.
- It does not require alteration.
Disadvantages of drafted patterns
- It is useful to only one person, the owner.
- Pattern drafting requires special skills.
What is a commercial pattern?
A commercial pattern is a ready-made pattern designed by experts to fit standard figure types.
- It is made using specific body measurements.
- It is available in different sizes.
- It is sold in special pattern envelopes and can be found in big shops.
- Examples: Vogue, New Look, Simplicity, Butterick, Style and Advance.
Advantages of commercial patterns
- They make sewing easy and accurate for body measurements.
- They are made in many different styles and designs.
- They have instruction sheets that show how to lay out, cut the fabric and make up the garment.
- Each pattern envelope gives the type and quality of fabric needed.
- It also states the sewing notions (such as zip or buttons) needed.
- They save time and reduce mistakes in garment making.
Disadvantages of commercial patterns
- They are expensive.
- They are not easily or readily available.
- They often need alteration to fit the user’s size.
- They are light and can tear easily.
What is the difference between drafted and commercial patterns?
| Feature | Drafted pattern | Commercial pattern |
|---|---|---|
| Made for | One particular person | Standard figure types |
| Made by | The dressmaker or student | Experts |
| Fit | Perfect, no alteration | Often needs alteration |
| Cost | Cheaper | Expensive |
| Instructions | None supplied | Instruction sheet in the envelope |
| Skill needed | Special drafting skill | Less skill needed |
What are pattern markings and symbols?
Pattern markings and symbols are signs on a pattern that show the dressmaker how to use it.
- Commercial patterns always carry them.
- The same marks should be made on drafted patterns.
- Straight grain: a line with arrows that shows the straight grain of the fabric.
- Place to fold: shows the edge of the pattern to be placed on the fold of the fabric.
- Darts: marked folds that are stitched to shape the fabric to the body.
- Notches: small marks used to match pieces correctly when joining them.
- Stitching line: the line along which the fabric is sewn.
- Cutting line: the line along which the fabric is cut.
- Seam allowance: the extra fabric between the stitching line and the cutting line.
How do you take body measurements?
Body measurements are taken with a tape measure around and along the body, and recorded at once.
What tools are used for taking body measurements?
- Tape measure: for measuring on the body.
- Pencil: for writing down the measurements.
- Paper: for recording the measurements.
- String: tied around the natural waistline.
What are the guidelines for taking body measurements?
- Take measurements over close-fitting garments or undergarments. Wear flat shoes.
- Let a friend or classmate take your measurements for you, for accuracy.
- Measure accurately.
- Record each measurement as soon as it is made.
- Use a tape measure that does not stretch.
- Pull the tape so that it is snug but not too tight.
- Stand well when the measurements are being taken.
What are the basic body measurements?
The basic body measurements are the ones needed to make simple garments.
Measurements for girls
- Bust: round the fullest part of the chest.
- Waist: around the smallest part of the trunk.
- Hip: round the largest part of the body below the waist.
- Length of back bodice: from the base of the neck down to the waist.
- Skirt length: from the waist down to the wanted hem.
- Across the chest: straight across the chest between the arms.
Measurements for boys
- Neck: around the base of the neck.
- Chest: round the fullest part of the chest.
- Sleeve length: from the shoulder tip down to the wrist.
- Length of back (bodice): from the base of the neck down to the waist.
- Shirt length: from the neck down to the wanted shirt hem.
- Across back: straight across the back between the arms.
- Across the chest: straight across the chest between the arms.
What are the pattern drafting tools and their uses?
Pattern drafting tools are the items used to draw and cut a pattern on paper.
- Tape measure: for measuring on the paper.
- Metre rule: for drawing straight lines.
- Pencil: for drawing lines and writing on the drafting paper.
- French curve: for shaping curved areas such as necklines and armholes.
- Paper scissors: for cutting the drafting paper.
- Eraser: for cleaning wrong lines or drawings.
- Brown paper: the paper on which patterns are drafted.
What is fashion designing?
Fashion designing is the art of planning and creating clothing styles.
- Fashion designer: a person who plans styles, chooses fabrics and makes or directs the making of garments.
- Link to drafting: a designer adapts a block to turn an idea into a new style.
- Work in Nigeria: fashion designers, tailors and seamstresses make clothes for individuals and for sale.
What are the elements of design?
The elements of design are the basic parts a designer uses to create a style.
- Line: the direction of seams and edges, such as straight, curved, vertical or horizontal lines.
- Shape: the outline of the garment, such as a flared or straight skirt.
- Colour: the shades chosen for the fabric and trimmings.
- Texture: how the fabric feels and looks, such as smooth, rough, soft or stiff.
What are the steps in designing and making a garment?
- Get an idea and sketch the style.
- Choose the fabric, colour and sewing notions.
- Take the body measurements.
- Draft the block and adapt it to the style.
- Mark the pattern with the needed symbols.
- Cut out the fabric, following the pattern.
- Sew the garment and check the fit.
Evaluation
- State four uses of patterns in garment construction.
- State three advantages of commercial patterns and four advantages of drafted patterns.
- State what each of these shows on a pattern: notch, straight grain, seam allowance.
- State where the bust measurement and the skirt length are taken.
- Define fashion designing and name two elements of design.
Assignment
List the four tools used for taking body measurements. Then list the basic body measurements needed for making simple garments for girls or for boys, and say where each is taken.
This term's Home Economics topics
JSS2 Second Term · 6 topics
- Impact of Family Value on Lifestyle
- Family Conflict and Crisis
- Hygiene and Puberty
- Adolescence and Sexuality
- Sexually Transmitted Infections
- Basic Drafting Pattern Techniques and Fashion Designing

