Skip to content

E-Waste Management – SS3 Computer Hardware & GSM Repair Lesson Note (Second Term)

Lesson note at a glance

Class
SS3
Subject
Computer Hardware & GSM Repair
Term
Second Term
Reading time
4 min
Start of this note, 5 of 8
Take this term’s notes offline
Reading here is free. Download all 8 SS3 Computer Hardware & GSM Repair Second term notes as PDF to print and Word to edit.
Download all three terms, ₦2,000
Instant download. Secure payment by Paystack. Card, bank transfer, USSD or OPay. Payment stuck? WhatsApp us.

E-waste (electronic waste) is any electronic or electrical equipment that is no longer wanted, no longer working or out of date.

Behavioural objectives

By the end of the lesson, students should be able to:

Advertisement
  1. define e-waste and give examples;
  2. name four harmful materials found in electronic devices and state their effects;
  3. explain the 3 Rs (reduce, reuse, recycle);
  4. state three things that must not be done when disposing of e-waste;
  5. describe how to manage e-waste in a repair workshop.

What is e-waste?

E-waste is any electronic or electrical equipment that is thrown away because it is unwanted, non-functional or obsolete (out of date).

  • Unwanted: a working phone replaced by a newer model.
  • Non-functional: a laptop with a dead motherboard that cannot be repaired.
  • Obsolete: an old CRT monitor that no longer suits modern computers.

What are examples of e-waste?

  • Phones and tablets: broken screens, dead boards and swollen batteries.
  • Computers: old laptops, desktops, motherboards, hard drives and keyboards.
  • Display devices: old monitors and television sets.
  • Accessories: chargers, cables, earphones and power banks.
  • Office equipment: printers, scanners and UPS units.

Why is e-waste different from ordinary waste?

  • It does not rot: a banana peel or paper decays, but a motherboard or phone battery does not rot away safely.
  • It holds chemicals: many parts contain materials that are dangerous if handled carelessly.
  • It holds valuable materials: gold, copper and plastic can be taken out and used again.
  • It needs special handling: technicians and users share responsibility for the environment and the community.

Why is e-waste dangerous?

E-waste is dangerous because electronic devices contain hidden materials that poison people and the environment.

Material Where it is found Harm it can cause
Lead Solder on motherboards Damages the human brain
Mercury Some old screens and monitors Very poisonous
Cadmium Some rechargeable batteries Can cause kidney damage
Lithium Modern phone batteries Can catch fire or explode if crushed in a bin
  • Dioxins: poisonous smoke given off when plastic and circuit boards are burned.

What are the 3 Rs of e-waste management?

The 3 Rs are reduce, reuse and recycle, a simple rule for protecting the environment from e-waste.

Advertisement

Reduce

  • Meaning: cut down the amount of e-waste you create.
  • Example: do not buy a new phone just because the colour is different.
  • Action: use your devices for as long as they work.

Reuse

  • Meaning: find another use for a device instead of throwing it away.
  • Example: give a slow laptop to a younger student for basic typing.
  • Example: keep a good screen as a spare part for another repair.

Recycle

  • Meaning: the last step, used when a device is truly “dead”.
  • Action: send it to a professional recycling centre.
  • Result: gold, copper and plastic are safely taken out to make new things.

What should you not do when disposing of e-waste?

Three things must never be done with e-waste: burning it, putting it in regular bins and dumping it casually.

  • No burning: some people burn e-waste to get the copper wires inside. The smoke contains dioxins, which can cause breathing problems and are linked to cancer.
  • No regular bins: never put batteries or motherboards in the normal dustbin. When it rains, chemicals can leak out, enter the ground and reach drinking water.
  • No casual dumping: do not throw old TVs or computers into bushes or gutters. They break down very slowly and leak poison into the soil where food is grown.

How do you set up a “green” workshop?

A green workshop is a repair shop that collects, stores and disposes of its e-waste safely.

  • Why it matters: a repair shop is a “generator” of e-waste.
  1. Separation: keep different bins for different waste. Use one for plastic (phone cases), one for metal (screws and frames) and a special “safe box” for batteries.
  2. The battery box: keep old batteries in a cool, dry place. Tape the terminals (ends) with electrical tape so they do not touch and start a fire.
  3. Find a partner: look for companies or government agencies that collect e-waste. Some centres take old motherboards to extract the precious metals safely.
  4. Data destruction: before you throw away a hard drive or a phone board, physically destroy the memory chip. A stranger must not find your customer’s data in a dump site.
Advertisement

How should each type of workshop waste be handled?

Waste Examples Correct handling
Plastic Phone cases, broken casings Put in the plastic bin for recycling
Metal Screws, frames Put in the metal bin for recycling
Batteries Old phone and laptop batteries Store in the safe box, tape terminals, hand over to a collector
Memory parts Hard drives, phone boards Destroy the memory chip, then send for recycling

Evaluation

  1. List three dangerous chemicals found inside a broken computer.
  2. Why is it a bad idea to burn old wires and cables to get the copper inside?
  3. What does the term “data destruction” mean in e-waste management?
  4. If a customer brings a completely “dead” phone that cannot be fixed, what steps from this lesson should you take instead of throwing it in the trash?

Assignment

Choose a repair shop you know, or imagine one. Write a short plan for managing its e-waste, using the four steps for setting up a “green” workshop.

This term's Computer Hardware & GSM Repair topics

SS3 Second Term · 8 topics

  1. GSM Advanced Repairs
  2. Smartphone Technology
  3. Advanced Computer Maintenance
  4. Entrepreneurship in ICT
  5. E-Waste Management
  6. ICT Business Marketing
  7. Financial Management
  8. Project Planning
Advertisement

Lesson Notes for Other Classes

Print it or edit it in Word

Every note is free to read online. A PDF or Word copy of one subject costs ₦1,000 for one term, or ₦2,000 for all three terms.

Sign in first, then choose your class and subject at checkout.