Revision of SSCE Past Questions I – SS3 Digital Technologies Lesson Note (Second Term)
Lesson note at a glance
- Class
- SS3
- Subject
- Digital Technologies
- Term
- Second Term
- Reading time
- 5 min
SSCE revision in Digital Technologies covers a theory paper (Section A) and a practical paper (Section B).
Behavioural objectives
By the end of the lesson, students should be able to:
- Define a term using the Definition + Example formula.
- State the units of storage conversions and the order of the computer generations.
- Describe the AND, OR and NOT gates.
- Write a basic Excel formula and explain a primary key in Access.
- Name the four main flowchart symbols and their uses.
- Apply time-management and saving rules in the SSCE practical.
How should you answer the theory questions in Section A?
Answer theory questions by giving a clear definition, an example and short points, because examiners want to see that you understand how ideas connect.
How do you define a term?
Use the Definition + Example formula: state what the term means, then give an example.
- Hardware: the physical parts of the computer (definition), such as the keyboard or monitor (example).
- Software: the programs that tell the computer what to do (definition), such as MS Word or Windows (example).
- Weak answer: a one-word answer earns few marks.
What are the generations of computers?
There are five generations of computers, and each is named after its main component.
| Generation | Main component |
|---|---|
| First | Vacuum tubes |
| Second | Transistors |
| Third | Integrated circuits (ICs) |
| Fourth | Microprocessors |
| Fifth | Artificial intelligence (AI) |
What are the units of storage?
Computer storage is measured in bytes, and each larger unit is 1024 times the one before it.
| Conversion |
|---|
| 8 bits = 1 byte |
| 1024 bytes = 1 kilobyte (KB) |
| 1024 KB = 1 megabyte (MB) |
| 1024 MB = 1 gigabyte (GB) |
| 1024 GB = 1 terabyte (TB) |
What is the digital divide?
The digital divide is the gap between people who have access to technology and those who do not.
- Example: a student in a town with internet access and a student in a village with none.
What are logic gates?
Logic gates are the decision-making circuits of a computer, and they give an output of 1 or 0 from their inputs.
Expect a logic gate question. It gives easy marks.
What is an AND gate?
An AND gate gives an output of 1 only when both inputs are 1.
- Everyday example: a door with two locks needs both keys.
| A | B | Output |
|---|---|---|
| 0 | 0 | 0 |
| 0 | 1 | 0 |
| 1 | 0 | 0 |
| 1 | 1 | 1 |
What is an OR gate?
An OR gate gives an output of 1 when at least one input is 1.
- Everyday example: a room with two doors, where either one gets you in.
| A | B | Output |
|---|---|---|
| 0 | 0 | 0 |
| 0 | 1 | 1 |
| 1 | 0 | 1 |
| 1 | 1 | 1 |
What is a NOT gate?
A NOT gate has one input and gives the opposite value as its output.
| Input | Output |
|---|---|
| 0 | 1 |
| 1 | 0 |
- Revision tip: practise drawing the symbols neatly.
- Common error: the shape of the back of the symbol (flat or curved) separates AND from OR, so a messy drawing loses marks.
How do you prepare for the database and spreadsheet practical?
In the practical (Section B), the examiners usually focus on MS Access or MS Excel.
What should you know in Excel (spreadsheets)?
- Formulas: always start with an equals sign (=).
- Cell range: A1:A10 means every cell from A1 to A10.
| Function | Use | Example |
|---|---|---|
| SUM | Adds numbers | =SUM(A1:A10) |
| AVERAGE | Finds the mean | =AVERAGE(A1:A10) |
| COUNT | Counts cells with numbers | =COUNT(A1:A10) |
| MAX | Finds the largest value | =MAX(A1:A10) |
| MIN | Finds the smallest value | =MIN(A1:A10) |
| IF | Chooses a result based on a test | =IF(B2>=50,”Pass”,”Fail”) |
- Common question: “Write the formula to calculate the total of cells A1 to A10.”
- Correct answer: =SUM(A1:A10)
What should you know in Access (databases)?
A primary key is a field that identifies each record in a table, and its value must be unique.
- Primary key: the “ID card” of a record, like your Admission Number.
- Text: letters and mixed characters, such as a student’s name.
- Number: values used in calculations, such as age.
- Date/Time: dates and times, such as date of birth.
- Currency: money values, such as school fees.
How do you answer programming and flowchart questions?
A flowchart is a diagram that shows the steps of a task using standard symbols.
- Typical task: draw a flowchart or write pseudocode for a simple job, such as adding two numbers.
- Pseudocode: the same steps written in short, plain statements.
What are the flowchart symbols?
There are four main flowchart symbols: oval, parallelogram, rectangle and diamond.
| Symbol | Use | Example |
|---|---|---|
| Oval | Start or End | Start |
| Parallelogram | Input or Output | Read A |
| Rectangle | Processing | Sum = A + B |
| Diamond | Decision | Is Age > 18? |
What are the steps for adding two numbers?
- Start.
- Read A and B.
- Calculate Sum = A + B.
- Print Sum.
- End.
- Syntax: if you write a program in BASIC or Python, syntax matters.
- Quotes: put text inside quotation marks ” “.
- Commas: use commas , to separate variables.
What are the networking topologies?
A network topology is the way computers and devices are arranged and connected in a network.
- Star: every computer connects to a central device, such as a switch or hub.
- Bus: all computers connect to one main cable.
- Ring: each computer connects to two others, forming a closed loop.
What is the best exam strategy for the SSCE?
The SSCE tests time management as well as knowledge.
- Read the instruction first: check the “Instruction to Candidates” in the practical. If you must save your work with your Index Number, do exactly that.
- Save often: work lost in the lab cannot earn marks, so save every 5 minutes.
- Use bullet points in theory: if a question asks for “Two advantages of a network”, list them.
- Resource sharing (for example, one printer for many computers).
- Easy communication (for example, emails).
What should you do before the exam?
Use this checklist the day before and on the morning of the exam.
- Pencil: bring a sharp pencil for flowchart drawings.
- Topologies: review Star, Bus and Ring.
- HTML tags: check that every <html> has a closing </html>.
Evaluation
- Define hardware using the Definition + Example formula.
- How many bits make 1 byte, and how many bytes make 1 KB?
- State the output of an AND gate when both inputs are 1, and the output of a NOT gate when the input is 1.
- Write the Excel formula to calculate the total of cells A1 to A10.
- State the use of each of these flowchart symbols: oval, parallelogram, rectangle and diamond.
Assignment
- Draw a flowchart for adding two numbers, using the correct symbols.
- State two advantages of a network, in bullet points.
- Explain what a primary key is in Access and give one example.
This term's Digital Technologies topics
SS3 Second Term · 7 topics

