Smart Solar Monitoring System – SS3 Solar Photovoltaic Installation & Maintenance Lesson Note (First Term)
Lesson note at a glance
- Class
- SS3
- Subject
- Solar Photovoltaic Installation & Maintenance
- Term
- First Term
- Reading time
- 5 min
A smart solar monitoring system sends live data from a solar inverter or charge controller, through a Wi-Fi or GSM dongle, to an app on a smartphone or tablet.
Behavioural objectives
- List the tools needed to connect a solar system to a monitoring app.
- Connect a Wi-Fi dongle to an inverter and pair it with a monitoring app.
- Read the live data on the dashboard (PV power, battery percentage, grid status and load).
- Explain common app alerts and what to do about them.
- Use the data to make the batteries last longer.
What is a smart solar monitoring system?
It is a solar set-up that connects to the internet so that its performance can be checked from anywhere.
- Solar input (PV power): shows how much power the panels are producing now.
- Battery percentage: shows how much charge is left in the battery bank.
- Load: shows how much power the connected appliances are using.
- Grid status: shows whether the public supply is live or down.
- IoT: short for Internet of Things, meaning devices that send data over the internet.
Why do we monitor a solar system with an app?
We monitor with an app because nobody can sit on the roof all day watching the panels.
- Remote checking: the owner sees the system from the living room or from another city.
- Early warning: the app shows a fault before the system fails completely.
- Fault finding: a technician can see the likely problem before travelling to the site.
- Longer battery life: the data shows when the batteries are being drained too hard.
What are the goals of this practical?
- Connect a solar system to a monitoring tool.
- Read and understand the “Live Data” (what is happening right now).
- Use the data to make the batteries last longer.
What tools do we need for a smart solar setup?
A smart setup needs four items, often called the “Tech Kit”.
- Smart inverter or charge controller: it must have a communication port, usually labelled RS485, RS232 or CAN.
- Wi-Fi or GSM dongle: a small device that plugs into the inverter and sends its data to the internet, like a “mobile phone” for the solar system.
- Smartphone or tablet: the device on which the monitoring app is installed.
- Internet connection: a router, MiFi or mobile hotspot gives the dongle a path to the “Cloud”.
How does the data travel from the inverter to the phone?
The data travels from the inverter to the dongle, then through the internet to the cloud, and finally to the app.
How do we connect the inverter to the app?
You connect by plugging in the dongle, powering up, pairing with the app and linking the dongle to Wi-Fi.
- Plug in the dongle: make sure the solar system is OFF. Plug the dongle into the communication port of the inverter and screw it tight.
- Power up: turn the system back on. A small LED blinks on the dongle.
- Pair with the app: open the monitoring app. Scan the QR code on the side of the dongle, which tells the app which inverter it is talking to.
- Connect to Wi-Fi: enter your Wi-Fi password in the app. When the dongle stops blinking and stays solid, it is “Online”.
What safety points should we remember?
- Switch off first: never plug or unplug the dongle while the system is running.
- Screw it tight: a loose dongle loses connection and sends no data.
- Keep the hotspot on: the dongle needs working internet to stay online.
How do we read the dashboard?
The dashboard is the main app screen, usually a flow chart with moving bubbles or lines showing where power is going.
| Reading | What it shows | What to look for |
|---|---|---|
| PV power (solar input) | Power coming from the panels now | 0W at 12:00 PM means something is wrong, such as a loose wire or very dirty panels |
| Battery percentage | Charge left in the batteries | A fast drop while the sun is out means heavy appliances, such as a pressing iron or heater, are in use |
| Grid status | State of the public supply (NEPA/PHCN in everyday speech) | The app shows “Live” or “Down” |
| Load | Power used by connected appliances | A sudden jump shows a heavy appliance has been switched on |
What is the practical exercise?
- Open the app and record the “Current Yield”.
- Switch on a high-power device, such as a microwave.
- Watch the “Load” number jump up.
- Note that the jump shows how much energy the appliance “eats”.
What are the common app alerts and what should we do?
An IoT system tells you when it is “sick” before it “dies”, through alerts like these.
| Alert | Meaning | Action |
|---|---|---|
| Low Battery Voltage | Too much power has been used, often at night | Turn off some lights and appliances immediately |
| Overload | An appliance is too heavy for the inverter | Unplug the heavy appliance |
| Device Offline | The Wi-Fi or data has usually run out | Check the router or hotspot. The solar system is probably working fine |
How can we use the data to make batteries last longer?
Batteries last longer when they are not drained too deeply or overloaded.
- Watch the battery percentage: reduce the load before the charge gets very low.
- Act on Low Battery Voltage alerts: switch off non-essential appliances at once.
- Avoid heavy appliances at night: pressing irons and heaters drain the batteries fast.
- Check PV power: low solar input means the batteries are not charging well. Clean the panels or check the wires.
How does checking the app first help a technician?
Checking the app first lets a technician find the likely fault before leaving the workshop.
- Discussion question: a customer calls to say “My lights are blinking”. How does checking the app first save time and transport money?
- Points to consider: is the grid down, is there an overload alert, is the battery low, is the system offline?
Evaluation
- List the four items in the “Tech Kit” for a smart solar setup.
- Why must the solar system be OFF before you plug the dongle into the inverter?
- What does a dongle that stops blinking and stays solid mean?
- At 12:00 PM the PV power on the dashboard shows 0W. Give two possible causes.
- What does the “Device Offline” alert usually mean?
Assignment
Write the four steps for connecting a Wi-Fi dongle to an inverter and pairing it with a monitoring app. Then describe what each of these dashboard readings tells you: PV power, battery percentage and grid status.
This term's Solar Photovoltaic Installation & Maintenance topics
SS3 First Term · 7 topics

