Final Year Project Supervision – SS3 Horticulture and Crop Production Lesson Note (Third Term)
Lesson note at a glance
- Class
- SS3
- Subject
- Horticulture and Crop Production
- Term
- Third Term
- Reading time
- 6 min
Project execution is the stage where a planned crop or horticultural project is carried out on the field, from site preparation to daily monitoring.
Behavioural objectives
By the end of the lesson, students should be able to:
- describe how to prepare a site for a crop or horticultural project;
- explain the difference between direct sowing and nursery planting, and state when to transplant;
- list the main field maintenance practices and give the purpose of each;
- describe how to apply fertiliser and water crops properly;
- state what to look for when monitoring a project and why records must be kept.
What is project execution?
Project execution is the action stage in which the written project plan is turned into a growing crop on the field.
- Follows planning: the plan from the last lesson (crop, site, spacing, inputs, budget) is now put into practice.
- Covers five tasks: site preparation, planting and transplanting, field maintenance, nutrient and water management, and monitoring with record keeping.
- Depends on timing: each crop has a suitable planting time in the season, so work should be done on schedule but never rushed.
- Shows real skill: it proves that the student can manage a living crop, not only write a plan.
How do you prepare the site?
Site preparation is the clearing, loosening and shaping of the land so that seeds or seedlings can grow well.
- Clearing: remove weeds, stumps and old crop stalks from the plot.
- Avoiding burning: chop the plant waste and use it as mulch or compost, because burning destroys organic matter.
- Tillage: loosen the soil with a hoe, spade or tractor so roots can spread and water can enter.
- Fine soil for root crops: carrots and onions need soft, fine soil so the roots and bulbs develop easily.
- Bed construction: most horticultural projects use raised beds, which improve drainage and keep roots from waterlogging.
- Paths between beds: they let you walk and work without stepping on the plants.
- Marking out: measure the beds and rows to match the spacing in your project plan.
How do you plant and transplant?
A crop is established in the field either by direct sowing or by raising seedlings in a nursery and transplanting them.
What is direct sowing?
- Direct sowing: seeds are planted straight into the main field where the crop will grow and mature.
- Suitable crops: maize, okra and other strong seeds that do not need special protection.
What is nursery planting?
- Nursery: a small, protected bed or seed tray where seeds are germinated and seedlings are raised.
- Suitable crops: delicate crops such as tomatoes, peppers and cabbage.
- Protection: the young plants are shielded from strong wind, heavy rain and harsh sun.
What is the difference between direct sowing and nursery planting?
| Feature | Direct sowing | Nursery planting |
|---|---|---|
| Place of germination | Main field | Nursery bed or seed tray |
| Transplanting | Not needed | Needed |
| Type of crop | Hardy crops | Delicate crops |
| Examples | Maize, okra | Tomato, pepper, cabbage |
How do you transplant seedlings?
Transplanting is the moving of seedlings from the nursery to the main bed once they are strong enough.
- Wait until the seedlings have 3 or 4 true leaves.
- Water the nursery well so the seedlings lift easily with soil around the roots.
- Dig holes in the main bed at the spacing given in your plan.
- Place each seedling in its hole and firm the soil gently around it.
- Water the seedlings straight after planting.
- Best time: late afternoon or a cloudy day.
- Reason: it reduces transplant shock and gives the plant the night to settle before the hot sun.
- Transplant shock: wilting or slow growth caused by disturbing the roots.
How do you maintain the field?
Field maintenance is the care given to crops after planting until harvest.
- Thinning: remove extra seedlings from crowded stands so the rest do not compete for water, light and nutrients.
- Supplying: plant new seeds or seedlings in gaps where the first ones did not germinate or died.
- Weeding: remove weeds regularly, because they compete with crops for water, nutrients and light.
- Mulching: cover the soil with dry grass or chopped plant waste to reduce weeds and keep moisture.
- Staking: give climbing or tall crops such as tomatoes and yams a stick to support them.
- Benefit of staking: it keeps fruits off the ground, where they may rot or be attacked by insects.
- Pruning: cut off sucker branches and dead leaves.
- Benefit of pruning: the plant uses its energy to grow bigger fruits instead of extra leaves.
How do you manage nutrients and water?
Nutrient and water management is the supply of fertiliser and water to the crop in the right amount, place and time.
What are the methods of applying fertiliser?
- Ring method: place fertiliser in a circle around the plant, a short distance from the stem.
- Side dressing: place fertiliser in a line beside the crop row, then cover it lightly with soil.
- Fertigation: dissolve fertiliser in irrigation water and apply it through the watering system, often used in greenhouses.
- Rule: never throw fertiliser at random or let it touch the stem or leaves, because it can burn the plant.
How do you irrigate crops?
- Irrigation: the artificial supply of water to crops when rain is not enough.
- Be regular: do not let the soil dry out completely between waterings.
- Best time: water in the early morning or evening, when less water is lost to the sun.
- Dryness test: push a finger into the soil. If it is dry about an inch (2.5 cm) below the surface, water the bed.
- Avoid flooding: too much water drowns roots and encourages rot.
How do you monitor the project and fix problems?
Monitoring is the daily inspection of the farm to find problems early and correct them quickly.
- Pest damage: holes in leaves show that insects are feeding, so apply neem oil or another organic spray at once.
- Nitrogen deficiency: leaves turning yellow may show that the plant lacks nitrogen.
- Phosphorus deficiency: leaves turning purple may show that the plant lacks phosphorus.
- Wilting: check soil moisture and roots.
- Weeds: remove new weeds before they spread.
Why is record keeping important?
Record keeping is the writing down of every farm activity and observation in a project logbook.
- What to record: dates of planting, weeding, spraying and fertiliser use, with the materials and amounts used.
- Also record: costs, plant growth, problems seen and the action taken.
- Evidence: the logbook proves your work, and your teacher uses it for grading.
- Learning: it helps you find what worked and plan the next project better.
Evaluation
- Name the three parts of site preparation and state what each one involves.
- Why are tomatoes, peppers and cabbage started in a nursery, while maize and okra can be sown directly?
- When should seedlings be transplanted, and at what time of day? Give a reason.
- Explain thinning, supplying, staking and pruning.
- Why should you record every spraying, weeding and fertiliser application in a project logbook?
Assignment
Describe how you would transplant tomato seedlings and care for them in the field, using the headings from this lesson. Mention how you would water them and what you would look for each day.
This term's Horticulture and Crop Production topics
SS3 Third Term · 8 topics

